KV Woodcarving Supplies

For All Your Carving Needs     

 

kvwcs@nbnet.nb.ca

Ph:(506) 847-3052

Fax:(506) 849-3052

Quispamsis, NB, Canada

 

KV Wood Carving Supplies accepts: Visa, Mastercard, Check or Money Order

 

 

 

 

 

 

OptiVisor is a precision binocular headband magnifier which permits unrestricted user efficiency while reducing eye strain - leaves both hands free and allows three dimensional vision - Used by anyone whose profession or craft requires close accurate work - Can be worn over prescription or safety eyeglasses. The Optivisor adjusts to all head sizes. It is very comfortable and swings up out of the way when you want it to. It leaves both hands free to work. The lens plates are precision ground glass. The DA3 is the common visor strength.                                                                                                                       

cat#DA3   $45.00                     

cat#DA4   $45.00

cat#DA5   $45.00

cat#DA7   $47.00 

cat#DA10 $47.00

Optiloupe easily attaches to either size of your optivisor. Adds extra power for monocular use, up to 6x magnification. Spring tension holds it in place.

cat#LPI $ 8.75

Repair Parts

Optivisor lens pin      cat#DA-PINS  $ .50       Optivisor Tension Nut  cat#DA-TNUT $ 2.95

Quasar Lighting System for Opitvisors

 

 

 

 

 

   The placement of the L.E.D.s on the Quasar Lighting System™ plays an essential role in the over-all performance of the Lighting System. Rather than having only one or two bulbs lighting your work area, the Quasar LS utilizes multiple light sources located in an array around your field of vision. The result is an even, bright field of light that is focused directly in your line of sight. It is similar to having several lights focused directly onto your work area from different angles.

    The entire Lighting System is also light weight. Only weighing 25grams without batteries and 57grams with batteries, the lighting system can be added to your visor without noticing much difference.

     Rather than clipping a light to the top of the visor, Novacon has embedded six super-bright white LEDs into a new frame that overlays the existing lens on your OptiVISOR. These six LEDs provide bright illumination within the focal range of the lenses. The illumination diffuses rather quickly beyond a few feet, which is just fine since the lenses are not optimized for that distance anyway.

     Installation is literally a snap. Unscrew the existing lens mounting screws from the OptiVISOR, replace them with snap pins that run through the light frame, lens plate, and finally through the OptiVISOR itself. Two snaps and the new assembly is in place.

     Next, the battery box is held in place on the side of the OptiVISOR using a Velcro strap. Like the mounting pins, this battery box installs and is removed in seconds.

     The unit is powered by a pair of AA Energizer batteries. The instructions that accompany the unit show that non-rechargeable AA batteries have the best performance for light brightness and duration. Energizers tested out the best. The worst performers are the rechargeable batteries as they are only 1.2 volts versus the standard battery rating of 1.5 volts.

 

Cat#QUASAR 6010          $ 30.00

 

0
 

 

Hosted, Designed & Optimized by; New Brunswick Web Design